Tilt is a very straightforward build. It is a green ROHS PCB marked v2.1.
- The Tilt PCB has a champfer that may make the board fit easier into certain skiffs.
- The screenprint on the board has the label for the large capacitor C21 superimposed over the label for R29 obscuring them both. If the interactive build page is used, this will not be a problem.
- The pots of the v2.1 board are the wrong way round. The simple, if strange, fix for this is to put your knob on upside down, so they start at 10 oclock and sweep anti-clockwise to 2 o’clock: this will match the graphics.
Freak Out! 